3. Operation
3.4. Fan speed setting
3.5.2. Vane·Vent. (Lossnay)
<Accessing the menu>
Cool
Room
Auto
Set temp.
Mode
Temp.
Fan
Fri
28.5
F1
F2
F3
F4
<Exiting the Main menu screen>
3.5. Airflow direction setting
3.5.1. Navigating through the Main menu
<Accessing the Main menu>
Press the [F4] button to go through the fan speeds in the following order.
Auto
•
The available fan speeds depend on the models of connected indoor units.
Note:
The number of available fan speeds depends on the type of unit
connected. Note also that some units do not provide an “Auto” setting.
In the following cases, the actual fan speed generated by the unit will differ
from the speed shown the remote controller display.
1. While the display is showing “STAND BY” or “DEFROST”.
2. When the temperature of the heat exchanger is low in the heat mode.
(e.g. immediately after heat operation starts)
3. In HEAT mode, when room temperature is higher than the temperature setting.
4. In COOL mode, when room temperature is lower than the temperature
setting.
5. When the unit is in DRY mode.
Operation
Main
Main menu
F1
F2
F3
F4
Press the [MENU] button on the
Main display.
The Main menu will appear.
Main
Main menu
Initial setting
F1
F2
F3
F4
Press [F2] to move the cursor left.
Press [F3] to move the cursor right.
<Item selection>
Press the [RETURN] button to exit
the Main menu and return to the
Main display.
If no buttons are touched for 10 minutes, the screen will automatically
return to the Main display. Any settings that have not been saved will
be lost.
Cool
Room
Auto
Set temp.
Mode
Temp.
Fan
Fri
F1
F2
F3
F4
Title
Not available
Unsupported function
Return:
F1
F2
F3
F4
The message at left will appear if
the user selects a function not sup-
ported by the corresponding indoor
unit model.
<Display of unsupported functions>
Select “Operation” from the Main
menu
(refer to 3.5.1), and press the
[SELECT] button.
Select “Vane·Louver·Vent.
(Lossnay)
” from the Operation
menu, and press the [SELECT]
button.
Operation
Main
Main menu
F1
F2
F3
F4
Main menu:
Cursor
Operation
Vane·Louver·Vent. (Lossnay)
High power
Comfort
F1
F2
F3
F4
7
en
RG79F455H01_en.indd 7
2019/07/15 9:13:12
009
