Mitsubishi Electric BR931, User Manual

Page: 44 / 47

English-43
English
PIP POP
SIDE BY SIDE
ASPECT
SIDE BY SIDE
FULL
OFF
PIP, POP function
The following table shows the combinations of signal inputs with which the “PIP” and “POP” modes function. However, these modes
do not function when the screen size is “CUSTOM” or “REAL”.
Sub screen
RGB1 RGB2 RGB3 RGB4 DVD/HD VIDEO<S> VIDEO
Main
scre
e
n
RGB1 × × × ×
  
RGB2 × × × × ×
 
RGB3 × × × × ×
 
RGB4 × × × × ×
 
DVD/HD × × × × ×
 
VIDEO<S>
    
× ×
VIDEO
    
× ×
By pressing the PIP ON/OFF button on the wireless remote control, you can change the PIP, POP, and SIDE BY SIDE modes in the
order shown below.
Alternatively, you can change the modes using the PIP MODE setting of PIP in the OSD main menu. See page 37.
[Reference]
The resolutions in the PIP and POP modes are as follows:
PIP SIZE < SMALL > : 320 pixels X 240 pixels
< MIDDLE > : 480 pixels X 320 pixels
< LARGE > : 640 pixels X 480 pixels
POP SIZE : 450 pixels X 338 pixels
NOTE:
Images displayed in the sub picture always fi t the PIP sizes shown above irrespective of the aspect ratio of the input image.
Other functions (continued)

: Supported
× : Not supported