11
Installation
To fit an external 5.25" floppy disk drive:
1.
Take suitable anti-static precautions as described in
the
XEN-LS Owner’s Handbook.
2.
Switch off the computer and disconnect it from the
AC power supply. Remove the system unit cover,
the expansion card cage and the bridge assembly
as described in the
XEN-LS Owner’s Handbook.
3.
If the computer has an internal diskette drive,
disconnect its ribbon cable from the motherboard
(underneath the bridge assembly) and from the
drive itself.
4.
Take the ribbon cable with four connectors and
attach connector Z to the internal diskette drive (if
there is one).
FRONT OF
MACHINE
CONNECT X OR Y
TO THIS CONNECTOR
X
Y
Z
CONNECT Z TO THE
INTERNAL FLOPPY
DISK DRIVE
