5
Installing a memory module
An Apricot XEN-LS’s system memory can be extended to a
maximum of 8 Mbytes by fitting one memory module.
Modules with a variety of capacities are available. Your
choice of module depends on how much motherboard
memory you start with, which is different for different
XEN-LS models. The following table shows the total
amount of memory attainable using the various memory
modules.
Memory modules
XEN-LS 386SX-16
XEN-LS 386SX-20
XEN-LS 486SX-20
available
(1 Mbyte)
(2 Mbytes)
(4 Mbytes)
1 Mbyte module
2 Mbytes
-
5 Mbytes
2 Mbyte module
3 Mbytes
4 Mbytes
6 Mbytes
4 Mbyte module
5 Mbytes
6 Mbytes
8 Mbytes
6 Mbyte module
-
8 Mbytes
-
8 Mbyte module
8 Mbytes
8 Mbytes
8 Mbytes
If your computer already has a memory module installed,
but has not reached the maximum capacity of 8 Mbytes,
you can remove the existing memory module and replace it
with one of a higher capacity. Note that, whenever you add
a module which would raise total memory above 8 Mbytes,
the memory in excess of 8 Mbytes is unusable.
