I n s i d e t h e S y s t e m U n i t
A/2 LS/VS 550 OWNER’S HANDBOOK
an earthed wrist strap and anti-static clothing. It is also a good idea
to use an ionizer or humidifier to remove static from the air.
When installing any upgrade, be sure you understand what the
installation procedure involves before you start. This will enable you
to plan your work, and so minimise the amount of time that
sensitive components are exposed.
Do not remove the system unit cover, nor the anti-static bag or
wrapping of any upgrade, until you need to.
Handle static-sensitive items with extreme care. Hold expansion
cards and add-on components only by their edges, avoiding their
electrical contacts. Never touch the components or electrical
contacts on the motherboard or on expansion cards. In general, do
not handle static-sensitive items unnecessarily.
Keep all conductive material, and food and drink, away from your
work area and the open computer.
Opening the system unit
To remove the system unit cover:
1.
Turn off the system unit.
2.
Set the AC power outlet switch to its Off position.
3.
Unplug all power cords from the rear of the system unit
4. If the system has a caselock (located at the rear of the system
unit) turn the caselock key to the unlocked position.
5.
Unfasten the two rear casing screws.
6.
Slide the top cover rearwards slightly, then lift it off.
1
10101
2