19
4. PROCEDURE UP TO START OF DATA LINK
4.1 Procedure up to start of data link
The procedure ranging from the installation of the AJ65BTS-RPH
module to the start of data link is described below.
POINT
The procedure described here is for the AJ65BTS-RPH module only.
In order for you to understand the procedure of the entire CC-Link
system, refer to the User’s Manual of the applicable master module.
Refer to Section 4.2.
Start
Start the system.
Completion
Install the AJ65BTS-RPH module.
Refer to Section 4.3.
Set the switches of the module.
Refer to the User’s Manual
of the applicable master module.
Refer to Section 4.4.
Connect the modules using CC-Link
dedicated cables.
Refer to Section 4.5.
Check for the connection conditions
of the modules (line test).
