SYSTEM
C-Z No sound (even after a tape has been inserted).
Check the
of the ignition
ensuring that it
is at
ACC or ON.
Try again after correcting.
Yes
Is the unit power
ON?
Yes
No
Try again after correcting.
Is the volume
the proper position?
No
Try again after correcting.
Yes
Check the electronic volume by pushing the volume
up button for a few seconds.
Is sound coming from the radio?
Yes
Repair or replace cassette player.
See the inspection items following
B- 1 vehicle fuses.
No sound from one speaker.
Is there any sound when the bal-
ance or fader buttons are
tered?
O K
No
Does the radio produce any sound?
When sound comes from only left or rrght
channel of the deck.
No
Change the tape and check for sound.*
prerecorded tape should be used on
both channels.
N
O
l
Ensure that the tape label
IS
not loose,
that the tape itself
IS
not deformed and
that the tape is tightly wound.
l
Tapes of C-l 20 or greater length often get
caught in the mechanism and should not
be used.
Clean the cassette player head and
check again.
I
Replace the cassette player and
check again.
Repair or replace cassette player.
No
See the inspection items following
connector.
TSB Revision