13
5.2 Terminal block socket installation
(1) Insert the terminal block socket in the CC-Link communication unit.
(2) Fasten the terminal block by tightening the terminal block fixing screws (2
places) with the tightening torque of 0.7 to 0.8 N
•
m.
(Expanded figure of part A)
CAUTION
Be sure to fix the wires or cables by ducts or clamps when connecting them to the
unit.
Not doing so can damage the unit or cables due to dangling, moved or accidentally
pulled cables or can cause misoperation due to cable contact fault.
POINT
When attaching or removing a communication cable to/from the terminal block
socket, detach the terminal block socket from the connector.
(When extension units are installed in multiple layers, the units do not have to be
removed from the GOT main unit.)
A
A terminal block
fixing screw
