6
*1 When the mode setting of CC-Link is Ver.1, the extension cyclic
setting is not available. (Fixed to Single)
*2 The remote READY flag is on during startup of the GOT.
It switches on when GOT power is switched on, hardware reset is
made, or the GOT is ready to operate.
If GOT power is on, the remote READY flag is off when offline
operation is performed (during OS installation or screen data
downloading) or while initial processing is executed.
Use it for the interlock ladder when writing or reading data to or from
the CC-Link Master station.
Signal Direction : GOT Master module
Device No.
Signal name
Extension cyclic setting*
1
Single
Double
1 station
occupied
4 station
occupied
1 station
occupied
4 station
occupied
RYn0 to RYnF
RYn0
to RY(n+6)F
RYn0
to RYnF
RYn0
to RY(n+C)F
User area
RY(n+1)0
to RY(n+1)F
RY(n+7)0
to RY(n+7)F
RY(n+1)0
to RY(n+1)F
RY(n+D)0
to RY(n+D)F
Reserved
Signal Direction : GOT Master module
Device No.
Signal name
Extension cyclic setting*
1
Quadruple
Octuple
1 station
occupied
4 station
occupied
1 station
occupied
4 station
occupied
RYn0
to RY(n+2)F
RYn0
to RY(n+1A)F
RYn0
to RY(n+6)F
RYn0
to RY(n+36)F
User area
RY(n+3)0
to RY(n+3)F
RY(n+1B)0
to RY(n+1B)F
RY(n+7)0
to RY(n+7)F
RY(n+37)0
to RY(n+37)F
Reserved
