MITSUBISHI ELECTRIC ENGINEERING TSD-FT1519-MN, User Manual

Page: 34 / 48

Connection &
Adjustments
10
4. Touch OSD function Setting
You can change of the touch sequence, and select "Enable/Disable" of Touch OSD in attached touch driver's
utility.
(1) Touch Sequence
You can change the touch position for move to touch OSD function.
Default is B: right upper corner, C: Right bottom corner, D: left bottom corner.
1) Click the "Touch OSD" of "UPDD install" of touch driver, then following window is indicated.
2) Please change a sequence, by touching the letter A, B, C, D of the monitor in indicated figure.
3) After that, store a touch sequence to a touch monitor by pushing the "save" button.
(2) "Enable/Disable" of Touch OSD function.
(3) OSD display
Default is "Enable" (checked).
OSD operation is available by installing optional OSD PCB, though set to disable touch OSD function.
Ɣ ,QDGGLWLRQDYDLODEOHWRGLVSOD\LWE\DIXQFWLRQRI
OSD screen is displayed when click "Show Touch OSD".