generAl infOrmAtiOn
• Minimum size LPG cylinder size - 4kg (POL Valve).
• Strong winds and low ambient temperatures will affect the heating performance of the appliance. You should
consider these factors during use, it is part of cooking outdoors.
• Never use your appliance in a garage, porch, breezeway or any other similar enclosed area.
• Air flow is vital for this appliances safe operation, do not obstruct the flow of ventilation in or around this
appliance.
• This appliance is not intended to be installed in recreational vehicles of marine vessels.
• Gas flowing through your regulator can cause a humming sound, this is normal and not a cause for concern.
Purging the gas system of air can assist in reducing this noise and should be done each time a gas cylinder is
connected to the appliance.
• Ensure all transit material has been removed prior to assembly and use.
impOrtAnt
IT MAY BE HAZARDOUS TO ATTEMPT TO FIT OTHER TYPES OF GAS CONTAINERS. ONLY USE IN WELL
VENTILATED AREAS.
CARBON mONOXIDE HAZARD
- THIS APPLIANCE CAN PRODUCE CARBON MONOXIDE
WHICH HAS NO ODOUR. USING IT IN A CONFINED SPACE (FOR EXAMPLE, CARAVAN, TENT, CAR, MOBILE
HOME) MAY CAUSE DEATH.
CAUTION:
ACCESSIBLE PARTS MAY BE VERY HOT. KEEP YOUNG CHILDREN
AWAY.
USE OUTDOORS ONlY.
Do not use this appliance if it is leaking, damaged or does not operate properly.
Only use this appliance on a horizontal surface.
The gas cylinder shall be changed in a well-ventilated location, preferably outside, away from people and any
sources of ignition, such as naked flames, pilot flames and electric heaters/ equipment.
This appliance must only be serviced by an authorised person. Avoid twisting or kinking the flexible hose. Do not
move the appliance during operation or whilst still hot.
Gas cylinders are to be stored outdoors in a well ventilated area out of reach of children. Any indoor storage shall
comply with AS/NZS 1596.
If there is a leak on your appliance (smell of gas), immediately attempt to turn off the cylinder valve. Remove the
appliance to a well ventilated location away from any ignition source. Check for leaks using soapy water. Do not try
to detect leaks using a flame. Do not modify this appliance.