Read this manual carefully before operating the product
Original Instructions Version March 12
4.
Attach pivoting plate, (item E), to the
assembled fixed position legs (items C),
using 2 x bolt, (item 3), and 2 x nut, (item
9). Ensure the bolts are tight, but still allow
the plate to pivot freely.
5.
Insert pivot clamp support, (item I), into
the top of the fixed leg, (as shown in fig 1),
then mount the measuring arm support,
(item H), using 1 x bolt, (item 5, then insert
the end cap, (item 8), into the top of the
other fixed leg.
6.
Insert the longer bar of the measuring arm,
(item G), into the measuring arm support,
(item H), insert the eye bolt, (item 11); to
secure the arm in place, then attach the
measuring arm ends caps, (item 12).
7.
Attach the pivot clamp, (item J), to the
pivot clamp support, (item I), by inserting
clamps pin through the eye of the support,
then secure with the r-clip, (item 7), as
shown in fig 2.
8.
Attach the guide bar cover, (item K), to
the pivot clamp support, (item J), using 1 x
bolt, (item 4), and 1 x nut, (item 9). Ensure
the bolt is tight, but still allows the cover to
pivot freely.
9.
Check that the saw horse is sturdy and that
all bolts are tightened.
Fig. 1
Fig. 2
I
G
J
I
11
H
