Read this manual carefully before operating the product
Original Instructions Version March 12
You will require –
- 1 x 13mm spanner or socket, (not supplied).
- 1 x 15mm spanner or socket, (not supplied).
- 1 x 6mm hex allen key, (this is supplied).
- A clean open space free of obstruction,
(this will aid the construction process).
Steps –
1.
Attach the fixed position legs, (item C), to plate (item F) using 4 x bolt (item 6).
Ensure that the slotted holes are facing outwards.
2.
Attach a lower leg brace, (item D), to the assembled legs using 4 x bolt (item 1) and
4 nut (item 9), then secure the feet, (item L), using 1 x bolt (item 2) and 1 x nut (item 9).
3.
Attach pivoting legs, (items A + B), to the fixed position legs (item C), using 1 x bolt (item 2) and 1
x nut (item 9).
Note: the guide plate at the top of the pivot leg is on the outside face, then secure the feet, (item
L), using 1 x bolt, (item 2), and 1 x nut, (item 9). Ensure the bolts are tight, but still free enough to
allow the legs to pivot.