CS260TX PREMIUM Chainsaw
14
Original Instructions Version November 16
CS260TX_141116
Installing the Guide Bar and Chain
Open the box and install the guide bar and the saw chain on the power unit as follows:
The saw chain has very sharp edges. Use thick protective gloves for safety.
1.
Pull the chain brake towards the front handle to check that the chain brake is not on.
2.
Loosen the nut (1) and remove the chain cover (2) (Figure 1).
3.
Install the spike (3) to the power unit using the 2 tapping screws (4) (Figure 1).
4.
Remove and discard the plastic packer (1) located on the bar studs (Figure 2).
Figure 1.
Figure 2.
5
.
Fit the guide bar (2) over the bar bolts (Figure 3).
6.
Fit the chain to the drive sprocket (Figure 4) and around the guide bar.
Figure 3.
Figure 4.
Summary of Contents for CS260TX
Page 34: ...CS260TX PREMIUM Chainsaw 34 Original Instructions Version November 16 CS260TX_141116...
Page 38: ...CS260TX PREMIUM Chainsaw 38 Original Instructions Version November 16 CS260TX_141116 Notes...
Page 39: ...CS260TX PREMIUM Chainsaw 39 Original Instructions Version November 16 CS260TX_141116 Notes...