Mitox 26B-SP, Operator'S Manual

Page: 15 / 32

26B-SP / 28BV-SP
15
Original Instructions Version June 17
IMPORTANT When using the machine as a vacuum collector, there is a risk of inadvertently
suctioning objects which can obstruct the machine and block the rotor. In this case:
– switch the motor off immediately - remove the spark plug cap.
– disassemble the vacuum tube.
– remove the foreign body from inside the vacuum inlet.
Check that nothing is blocking the rotor before using the machine again.
IMPORTANT A too full bag reduces the machine's efficiency and could cause
the engine to over heat.
4.3 END OF OPERATIONS
When you have finished your work:
– Switch off the engine as indicated above (Chap. 3.3).
– Empty the bag if used as a vacuum collector.
Correct maintenance is essential to maintain the original efficiency
and safety of the machine over time.
During maintenance operations:
– Remove the spark plug cap.
– Wait until the engine is sufficiently cold.
– Wear protective gloves.
– Do not work on the machine if not in possession of the necessary skills and tools.
5.1 STORAGE
After every working session, clean the machine thoroughly to remove all dust and debris, and
repair or replace any faulty parts. The machine must be stored in a dry place away from the
elements.
5.2 CYLINDER AND SILENCER
To reduce fire risks, periodically clean the cylinder fins with compressed air and clear the silencer
area from dust, leaves or other debris.
5.3 STARTING SYSTEM
To avoid overheating and damage to the engine, always keep the cooling air vents clean and free
of sawdust and debris. The starter rope must be replaced as soon as it shows signs of wear.
5. ROUTINE MAINTENANCE