Mitox 26B-SP, Operator'S Manual

Page: 9 / 32

26B-SP / 28BV-SP
9
Original Instructions Version June 17
F) ENVIRONMENTAL PROTECTION
Environmental protection should be a priority of considerable importance when using the
machine, for the benefit of both social coexistence and the environment in which we live. Try not
to cause any disturbance to the surrounding area.
• Scrupulously comply with local regulations and provisions for the disposal of oils, petrol,
damaged parts or any elements which have a strong impact on the environment; this waste must
not be disposed of as normal waste, it must be separated and taken to specified waste disposal
centres where the material will be recycled.
• Scrupulously comply with local regulations and provisions for the disposal of waste materials.
•
A t the time of decommissioning, do not pollute the environment.
OPERATING INSTRUCTIONS
1. PREPARE THE MACHINE
The machine can be used as both a blower and a vacuum collector (vacuum function on 28BV-
SP only); for both of these uses it is necessary to correctly arrange the appropriate accessories
included with the equipment.
Unpacking and completing the assembly should be done on a flat and
stable surface, with enough space for moving the machine and its pack-
aging, always making use of suitable equipment.
IMPORTANT The safety systems prevent the engine from starting if the vacuum or blower tubes
are not assembled correctly.
1.1 USE AS A BLOWER
• Remove the screw (1) and its
washers (2).
• Align the first blower tube
compartment (3) with the
protrusion (4) of the air outlet,
push the tube and turn it
90° clockwise, in order to
permanently fix it in place.
• Fix the tube (3) to the air outlet
using the screw (1) and its
washers (2).
• Align the second blower
tube compartment (5) with
the protrusion (6) of the first
tube, push the tube and turn
it 90° clockwise, in order to
permanently fix it in place.
NOTE The machine is correctly assembled when the flat part of the blower chute is pointed
towards the ground. The engine can not start if you do not assemble the blower tube when using
as a blower.