Mitel SX-200 ICP - 1.0 5020, Technician'S Handbook

Page: 157 / 360

149
Advanced Installation and Programming
- Code: 133.
Click OK .
- Value : enter a value from 1 to 7; Mitel recommends 0x6.
Click OK .
11. Highlight the Scope which contains the IP range for the IP Phones and
select Scope Options .
12. In Action , click Configure Options .
13. In the General window, select option 003 Router and enter the IP
address of the default Gateway and then click Add .
14. Click OK .
Configuring a Windows 2000 DHCP server (Release 4.0 and later)
Note : Options 128-133 used in previous ICP releases are required to
provide backward compatibility with IP sets that have yet to be upgraded
with firmware that supports options 124/125 or 60/43. After the upgrade,
the old options may be removed to prevent future conflicts with standard
use or with other vendors' use of these options.
To create Options 60/43 on a Windows 2000 or Windows 2003 DHCP
server:
1. Upgrade the SX-200 ICP to Release 4.0.
2. Upgrade the IP Phone firmware.
3. Start DHCP Manager.
4. In the console tree, click the applicable DHCP server branch.
5. Right-click the server, then click Define Vendor Classes followed by
Add.
6. In the New Class dialog box, type "Mitel Vendor Class" or other name
for the new option.
7. Type "ipphone.mitel.com" in the right side of the text box under ASCII.
8. Enter a null terminator (0x00) at the end of the hex string under Binary.
9. Click OK and then click Close.
Note:
The server will automatically convert the numeric value to Hex.
Note: Neither Windows 2000 nor Windows 2003 support DHCP options
124/125. Options 60/43 must be used instead.