Mitel SX-200 ICP - 1.0 5020, Technician'S Handbook

Page: 132 / 360

124
SX-200 ICP CX/CXi Technician’s Handbook
SpectraLink Devices and Access Points
The following table summarizes the programming requirements for
SpectraLink and other associated third-party devices. For detailed
instructions, refer to the SpectraLink documentation on the SX-200 ICP
software CD. See also the documentation supplied with the Access Points
selected for the installation.
Notes:
1. The menus and options in the examples may vary slightly
depending on the version of software in the device or the device
type.
2. Settings not explicitly configured should be left at their default
values.
Table 19:
SpectraLink Installation Checklist
NetLink Telephones
Parameter Requirement
ESS ID Ensure that ESSID matches Access Point ESSID.
Example:
ESS ID -> Static Entry -> 123456
License
Management Ensure that selected license setting allows for TFTP Server IP Address
Input.
Example:
License Mgmt -> Set Current -> Type 014
Security Ensure that selected security matches Access Point Security Settings.
Example:
Security -> WEP -> Authentication -> Open System
Security -> WEP -> WEP On/Off -> WEP On
Security -> WEP -> Key Information -> Default Key -> 1
Security -> WEP -> Key Information -> Key Length -> 40-Bit
Security -> WEP -> Key Information -> Key #1 -> 1111111111
Security -> WEP -> Key Information -> Key #2 -> 2222222222
Security -> WEP -> Key Information -> Key #3 -> 3333333333
Security -> WEP -> Key Information -> Key #4 -> 4444444444
Security -> WEP -> Rotation Secret -> 1
NOTE: Please be aware that once a WEP Key has been entered, it will
not be displayed when re-accessing that Key Information menu.
CAREFULLY enter the required Key to prevent typos.
(Page 1 of 4)