CALL PARK AND PAGE
What is Park and Page
With Park and Page, you can park a call and initiate
a page all in one step.
Park and Page options include:
O
Park and Page Set:
After a call is parked, the
system performs an all-set page.
O
Park and Page Group
: After a call is parked, the
system pages your Paging Group.
O
Park and Page:
After a call is parked, you must
enter the extension or Page Group number.
O
Park and PA Page:
After a call is parked, the you
must enter a Paging Zone number (0-9).
Page all Phones and the PA:
O
Answer or make a call.
O
Press TRANS/CONF.
O
Dial *63 then *.
Page all Phones in a Group and the PA:
O
Answer or make a call.
O
Press TRANS/CONF.
O
Dial *63 and press #.
Page an Extension Number:
O
Answer or make a call.
O
Press TRANS/CONF.
O
Dial *63 and dial the extension.
Page all Phones in a Specified Group and the PA:
O
Answer or make a call.
O
Press TRANS/CONF.
O
Dial *63.
O
Dial the two-digit Page Group Number,
then #.
Park a Call in Orbit and Perform a PA Page to any or
all Nine Paging Zones:
O
Answer or make a call.
O
Press TRANS/CONF.
O
Dial *64 and dial the Paging Zone
number
(0 for all zones, 1-9 for a specific zone).
Note:
To Park and Page call using speed call keys, press
TRANS/CONF to get dial tone before pressing a speed
call key programmed with the Park and Page access codes
plus the digits for the required paging option (for example,
an extension number to page a single phone or * to page
all phones plus PA paging).
CALL PARK - DESTINATION PHONE
What is Call Park - Destination Phone
Call Park - Destination Phone allows you to park an
answered call on another phone. If a parked call is
not retrieved after a specified length of time, a
reminder occurs.
Park an active call on another phone
O
Press TRANS/CONF
to get dial tone.
O
Dial *62, and then dial the extension of
the destination phone.
If the call is parked successfully, dial tone, busy tone or a
page occurs. If the call is not parked, reorder tone
occurs.
To retrieve a call parked on another phone:
O
Press the flashing Call Park feature key.
OR
O
Dial *22.
CALL PARK - SPECIFIC ORBIT
What is Call Park - Specific Orbit
You can park a call in a specific orbit by entering a
two-digit (01-25) orbit number.
Park a Call in a Specific Orbit
O
Press the System Park feature key.
O
Dial a two-digit Orbit Number (01-25).
If the selected orbit already has a parked call, press the
Number
or
Num
softkey, then enter another orbit
number.
