Mitel Superset 4025 User Manual Download Page 24

Page: 24 / 49

-20-

Call Forward - I'm Here

To forward calls from a remote station to your current location:

1. Press

SUPERKEY

2. Press the

softkey until "Call Forwarding?" appears.

3. Press the

Yes

softkey.

4. Press the

Next

softkey until "I'm Here" appears.

5. Press the

Yes

softkey.

6. Dial the extension of the remote station.
7. Press the

Save

softkey.

To cancel Call Forward - I'm Here from the station that set the remote

forwarding:

1. Lift the handset.
2. Dial

3. Dial the extension of the remote station.
4. Hang up.

To cancel Call Forward - I'm Here from the station that was forwarded:

1. Press

SUPERKEY

2. Press the

softkey until "Call Forwarding?" appears.

3. Press the

Yes

softkey.

4. If "External Calls?" appears, do the following:

a. Press the

Yes

softkey.

b. Press the

Del

softkey.

c. Press the

Next

softkey until "Internal Calls?" appears.

d. Press the

Yes

softkey.

e. Press the

Del

softkey.

5. If "External Calls?" does not appear, press the

Del

softkey.

Call Forward - Forced

To force an incoming call to be forwarded:

Press the

Forward

softkey.

To immediately tranfer to another extension's No Answer forwarding
destination when making a call:

Press the

FwdMe

feature key when it lights.

Summary of Contents for Superset 4025


















































Search results

Summary of Contents for Superset 4025

Reviews:

Related manuals for Superset 4025

Brands by name

Popular brands

Mitel Superset 4025, User Manual

Search results

Summary of Contents for Superset 4025

Reviews:

Related manuals for Superset 4025

Brands by name

Popular brands