185
Note
The handset may get warm during the initial charge.
Switch on/off your phone
To switch off the power of your phone press and hold during
standby.
To switch on the power of your phone press . The battery icon
will display in 10 seconds. If the battery level is too low, the handset
may not power up.
To set your handset’s clock
Your clock resets to 12:00AM or 00:00, depending on time format
you are using, each time you replace the batteries
or switch off the phone.
To set your clock:
Press MENU during standby.
Press to select DISPLAY, and then press OK.
Press to select CLOCK, and then press OK.
Press to change the HOUR, and then press
Press to change the MINUTE.
If you set the time format of your clock to 12 hours, go to step 6. If
you set it to 24 hours, go to step 7.
Press. Press to select AM/PM.
Press OK to confirm.
SET THE CLOCK TO 12 HOURS/24 HOURS
To change your phone’s time format:
1. Press MENU.
2. Press to select DISPLAY. Press OK.
3. Press to select TIME FORMAT. Press OK.
4. Press to select 12 HOURS or 24 HOURS.
5. Press OK to confirm.
Using your phonebook
You can use your phonebook to manage your contacts. Your phone
has a private phonebook and a shared phonebook. The information
in your private phonebook is stored in your handset. If you have
more than one handset, each handset has its own phonebook.
The information in your shared phonebook is stored in System
Speed dial list in the Mitel 1000. The information is shared by all the
handsets cordless and wired. See system speed dial on page 42 on
the programming of the list from a Featurephone.
Your phone must have a link with the base unit in order to use the
shared phonebook.
Your private phonebook can store 100 records and the system
phonebook also has 99 records.