39
Making a call
Press
Dial the number you want to call. The number appears on the display and is
dialed.
Note
Call timer:
The call timer shows the duration of your current call
on display.
Note
Out of range warning:
If you move too far away from the base
Mitel 1000 during a call, your phone will sound an alert tone, and
will flash. You need to move closer to the base Mitel 1000 or your
call will be disconnected.
Note
Low battery warning:
If your phone is almost out of battery
during a call, it will sound and alert tone. Place your phone on the
base Mitel 1000 for charging as soon as possible or it would turn
off when it is out of battery. Placing the phone on the base Mitel
1000 for charging will end the current call.
Preparatory Dialing (Pre-Dial)
With pre-dial, you can see and edit the number you are calling on the display
before dialing it.
Enter the number you want to call. The number appears on the display.
Deleting digits:
Press CLEAR to delete an incorrect digit. If you press CLEAR
on the last digit, your phone will return to standby.
To Dial the number Press
Saving a number from pre-dial
1.
Enter the number in standby. The number appears on the display
2. Press
SAVE.
Note
Memory Full:
If the phonebook is full, FULL is displayed, and
then the phone returns to standby.
3.
Enter the name for the record. You must enter a name.
4.
Press .
5.
Edit the number for the record if necessary. You must enter a
number.
6. Press
SAVE
to confirm. The phone returns to standby.
End a call
Press or place the phone on the base unit or charger.