Mitel SUPERCONSOLE 1000 SX-200, User Manual, Page: 72 / 94

72
SUPERCONSOLE 1000
®
User Guide
Listing/Counting Rooms by Occupancy and
Condition Status
You can display a list of rooms by occupancy and condition status—for
example, Vacant and Not Clean, or Occupied and Maid Present. The
system also reports the total number of rooms that are in the state you
specify. You can cycle through all rooms or start with a particular room
number—for instance, the first room on the third floor.
To list all rooms by occupancy and condition status:
1. Press Function .
2. Press [G
UEST
R
OOM
] .
The display shows:
3. Press the softkey that corresponds to the rooms you want to display—
for example, to display all vacant and clean rooms, press [V
AC
/C
LEAN
R
M
] .
4. Press [M
ORE
…] to display the next 10 rooms matching the specified
states.
If a printer is attached to the console, you can print a list of all vacant
or occupied rooms. For more information, see <italic>Printing Reports
on page 77.
To display a list of rooms beginning with a particular room number:
1. Complete steps 1 to 4 above.
2. Press [R
OOM
N
UMBER
] .
3. Dial the number of the first of the rooms you want to display.