GX Gateway Hardware Installation Guide
16
#
LED
Behavior
Condition
13
ETH2/3/4/5/-Right LED
(activity)
Green blinking, variable rate Network traffic
Green, steady ON
No network traffic
OFF
Not connected
13
ETH2/3/4/5/ -Left LED
(speed)
OFF
10 Mbps
Green
100 Mbps
Yellow
1000 Mbps
16
LED
Green, steady ON
Indicates that the BRI port is
well connected/configured
and the link is up.
OFF
Indicates that the BRI port is
not well connected or
configured, and that the link
is down.
Switches
#
Switch
Description
4
Reset/Default
Allows setting the unit to default (known) values. Refer to
RESET/ DEFAULT
Button
(p.28)
Connectors and cards
#
Connectors/
cards
Description
5
USB
USB connector
6
SYNC IN
8 KHz TDM synchronisation pulse input
7
SYNC OUT
8 KHz TDM synchronisation pulse output
10
PRI card with PRI
port
RJ-48 connector for ISDN-PRI connectivity
12
ETH1
A 10/100/1000 BaseT Ethernet RJ-45 connector for access to a LAN,
WAN, or computer. This port is by default used for uplink / WAN
connection.
13
ETH2-ETH3-
ETH4/ ETH5
10/100/1000 BaseT Ethernet RJ-45 connector for access to a LAN,
WAN or computer. These ports are used by default for LAN
connections.
14
FXS card with 4
FXS ports
RJ-11 connector for phone/fax/PBX-FXS connection
15
FXO card with 4
FXO ports
RJ-11 connector for PSTN/PBX-FXS connection
