1/1553-ANF 901 54 Uen E5 2016-05-16
50
O
THER
FEATURES
If the time or return is set to be the date, it is possible to have it as MMDD (month +
day) or DDMM (day + month).
The message diversion position must first have been programmed as your common
divertee position.
It is also possible to order message diversion for your extension from the terminal situ-
ated at the message diversion position.
9.10.2.1
To order from your extension telephone
Table 9
9.10.2.2
To order from the follow me position for ongoing follow me extension
Table 10
Via an I/O terminal it is possible to program the PBX so that the message diversion
receives higher priority than direct diversion or follow me. If this is not the case then,
for message diversion to function, it will be necessary to cancel the ongoing follow me.
9.10.3 TO
CANCEL
MESSAGE DIVERSION
To cancel an ongoing message diversion you key a predetermined code on your tele-
phone. When you do this, any messages for you will be printed out on the printer which
identity (number) you can state in the extension code. If you omit this number from the
code the messages will be printed out at a predetermined terminal (printer).
•
Lift handset and await dial tone
•
Key * 23 * reason for absence (one digit) *
estimated time/date of return (four digits) #
alternatively
•
Key * 23 * reason for absence (one digit) #
•
Await verification tone, replace handset
•
Lift handset and await dial tone
•
Key * 230 * extension number with ongoing follow me *
reason for absence (one digit) *
estimated time/date of return (four digits) #
alternatively
•
Key * 230 * extension number with ongoing follow me *
reason for absence (one digit) #
•
Await verification tone, replace handset