1/1553-ANF 901 54 Uen E5 2016-05-16
24
D
URING
CALLS
5.10.1
SUFFIX DIALING - PERMANENTLY ACTIVE
All digits entered are automatically converted by the exchange into DTMF signals
which are then transmitted along the connected lines.
If your system is set up to check the parking status in case of permanently active suffix
dialing, the post dialled digits are treated as function keys in case of individual parking
or as DTMF tones in case of common parking.
5.10.2
SUFFIX DIALING - ACTIVATED BY A FEATURE CODE
The suffix dialing feature is activated by dialing the digit 9 in speech. The digits keyed
in after the feature is activated will be transmitted as DTMF signals along the connected
line. This allows you, when in speech mode, to access other features (such as confer-
ence calls and parking) without having these on function keys.
If a call is parked when suffix dialing was active or if refer back is used when suffix
dialing was active, the feature is cancelled when referring back to the originating party.
5.11
ADDITIONAL DIRECTORY NUMBER, ADN
You can be assigned one or more additional directory numbers. These are
programmed on free function keys on your telephone. When using the additional line,
use the following procedures:
5.11.1
TO RECEIVE A CALL
Incoming call to an additional line-key is indicated by a flashing lamp (the additional
line-key’s lamp) and a ringing signal is heard.
•
Lift the handset (dial tone).
•
Press the additional line-key.
5.11.2
TO RECEIVE A CALL IN HANDS-FREE MODE
•
Press the additional line-key.
5.11.3
TO TERMINATE THE CALL
•
Press the Clear-key or replace the handset.
5.11.4
TO MAKE A CALL
•
Lift the handset (dial tone).
•
Press the Additional line-key (dial tone).
•
Dial the wanted number.
5.11.5
USING FEATURES FROM AN ADDITIONAL LINE
Features have the same procedure as for triple access line if nothing else is stated with
the exception that the additional line-key has to be pressed after lifting the handset.