Mitel Aastra 470, System Manual, Page: 53 / 284

Expansion Stages and System Capacity
53
Aastra 470 as of R3.2
syd-0337/1.6 – R3.2 – 09.2014
Tab. 22 Max. number of voice channels per DSP chip on SM-DSP1
1)
or SM-DSP2
1)
Notes
– To configure VoIP channels on the DSP chip of a DSP module, make
sure the ( =ym ) VoIP mode parameter in the DSP configuration is not
set to No VoIP . With the exception of the IP media modules the config-
ured VoIP mode applies to all the DSP chips of a node. If VoIP mode is
set to G.711 , two G.711 VoIP channels per system can be used without
a licence. The G.711 VoIP channels of the configurable DSP chip on
processor card CPU1 can be combined with G.711 VoIP channels of
DSP modules.
– If audio channels are configured and licensed, the two basic audio
channels that can be used without a licence are redundant (see
Tab. 16 ).
– Audio channels and FoIP channels can only be configured on one DSP
chip per node.
– The system has to be restarted for the configuration changes of the
DSP to take effect.
– After a first start all the DSP chips are configured on DECT .
DECT Audio
1)
1)
Licence(s) required (see also "Licences", page 67 ).
GSM
1)
Remarks
10
8 10
6 18 10
46
1)
Although no longer available, the module is still supported.