Safety, Operation, & Maintenance Manual
Linear Cut Processing Systems
Pre-Operation
001128
6
5.4
Powering Up the Motor Controls
5.5
Homing the Pusher
1.
To begin homing, press the button shown below
Note: If this button is flashing in color, this indicates homing is required and is the only option.
2.
The pusher will begin moving toward the homing sensor. Once the pusher reaches the homing sensor, it will
move the opposite direction, away from the sensor. Then, the pusher resets its internal reference and the
pusher’s homing is completed.
NOTE: For efficiency, always home the pusher before homing the saw.
