8224 N/B Maintenance
8224 N/B Maintenance
63
Reassembly
1. Carefully, align the arrowhead corner of the CPU with the beveled corner of the socket, then insert CPU pins
into the holes. Tighten the screw by a flat screwdriver to locking the CPU.
2. Connect the fan’s power cord to the system board, fit the heatsink upon the CPU and secure with six spring
screws.
3. Replace the CPU cover and secure with seven screws.
4. Replace the battery pack. (Refer to section 2.3.1 Reassembly)
4. To remove the existing CPU, loosen the screw by a flat screwdriver,upraise the CPU socket to unlock the CPU.
(Figure 2-7)
Figure 2-7 Remove the CPU
MiTac Secret
Confidential Document
Summary of Contents for 8224
Page 164: ...M iTacSecret ConfidentialDocum ent...
Page 165: ...M iTacSecret ConfidentialDocum ent...
