Mishio MK-288, Instruction Manual, Page: 9 / 27

- 8 -
MONITOR FUNCTION DECRIPTION
Display parameters
Time, Speed, Distance, Odometer, Pulse, Calories
Time .......................................................................................................................... 00:00-99.59
Speed ...................................................................................................................... 0-99.9 Km/h
Distance ..................................................................................................................... 0-999.9 Km
Odometer ................................................................................................................... 0-999.9 Km
Calories..................................................................................................................... 0-999.9 Kcal
Pulse ......................................................................................................................... 40-240 BPM
Scan: When “SCAN” flashes, each function will be displayed one by one in turn. When it is not
displayed, enter the lock display mode and fix it on a certain function.
How to use
1. Press the center button to turn on the display.
2.
When “SCAN” flashes, each function will be displayed one by one in turn. Press the button
at this time, "SCAN" will disappear, and stop the display in turn at the same time, enter the
lock mode and fix it on a certain function, and then you can press the button to select the
function you want to display.
3. Press and hold for 2 seconds to clear each reading (except ODO total distance). The total
ODO distance will not be cleared without replacement as long as the battery is always
charged.
Matters needing attention
When the movement is stopped and there is no key operation within 4 minutes, the electronic
watch will automatically shut down.
When there is motion sensing or key operation, the electronic watch will automatically turn on.