Miranda NV9642, User Manual

Page: 71 / 98

NV9642 Control Panel • User’s Guide 61
5. Operation
Setup Mode
The actual colors cannot be represented accurately in print or in a PDF file displayed on your
screen. There is a small amount of variation in color from button to button. See
LCD Buttons on
page 77 for a color chart.
Setup Mode
Setup mode occurs when the NV9642 is disconnected from its network and is freshly powered up.
In setup mode, you can set or change the panel ID, determine software versions, and perform a test
of the panel’s buttons. It is in setup mode that you must initially set the panel ID.
The panel powers up with the top right button illuminated in green and reading ‘Menu’:
S
It can take a few seconds for the menu buttons to appear.
In addition, the display shows the panel ID:
In this illustration, the panel ID was already set to 23. The “Acquire IP Address” is a status message
during initialization. Until you connect the panel to its network, the status message will remain the
same.
Press the ‘Menu’ button at the far right to access the setup menu:
There are 3 setup menu choices. The ‘Exit’ button at the far right allows you to leave the menu.
• Panel ID Entry.
Press the Panel ID Entry button to set the panel ID. A numeric button array appears:
Use the numeric button array as a keypad to enter a panel ID. What you enter appears on the
‘Panel ID’ button at the top left.
To make the ID permanent, press ‘Save’; to cancel your entry, press ‘Cancel’. In either case,
you will be returned to the setup menu.
MENU MENU
• • •
ACQUIRE IP ADDRESS ACQUIRE IP ADDRESS
NV9642
NV9642
PANEL ID: 23 PANEL ID: 23
ENTER ENTER
PANEL ID PANEL ID
SOFTWARE SOFTWARE
VERSIONS VERSIONS
PANEL PANEL
TEST TEST
MODE MODE
EXIT EXIT
• • •
SAVE SAVE EXIT EXIT 8 8 9 9 O O 1 1 2 2 4 4 5 5 6 6 7 7 3 3
• • •