Miranda NV9642 User Manual Download Page 29 | Manualshive

Page: 29 / 98

background image

NV9642 Control Panel • User’s Guide

19

4. Configuration

Commitment Buttons

Commitment Buttons

Two buttons at the bottom of the configuration page are self-explanatory and present on most con-
figuration pages:

• Revert to Saved. Press this button if you want to discard any recent changes you have made.
• Save. Press this button to commit all your recent changes.

Neither of these actions is reversible.

Panel Options

The panel options section, in the middle of the configuration page, has two parts: drop-down menus
and checkbox options. These are the drop-down menus:

These are the options:

Default Mode

X-Y Mode

Starts the panel in XY mode after a reset.

a

Multi-Dest Mode Starts the panel in multi-destination mode after a reset.

Release Mode

Normal Release

This panel can release “locks” and “protects” set by the designated

user (at this panel or any other panel).

Force Release

This panel can release locks and protects set by any user.

Default
Destination

None

After a reset, the panel displays no destination device. (This is not
recommended.)

‹device›

The Panel uses the specified device as the destination after a reset.
(The ‘Default State’ button also returns the panel to this destination.)

Preset Monitor

None

The preset source video is not sent to a monitor.

‹device›

The preset source video for the selected destination appears on the
specified monitor (device).

Status Monitor

None

The current source video is not sent to a monitor.

‹device›

The current source video for the selected destination appears on the
specified monitor (device).

«
...
27
28
29
30
31
...
»

Summary of Contents for NV9642



































































































Reviews:

No comments

Related manuals for NV9642

Brand: Gantner Pages: 56

Brand: jcm-tech Pages: 8

Brand: K&K Pages: 6

Real Living iM1

Brand: Yale Pages: 2

Brand: Osram Pages: 3

Brand: Whale Pages: 8

Brand: Tascam Pages: 8

Brand: Quickie Pages: 108

Brand: GARDINER TECHNOLOGY Pages: 28

Brand: Wilo Pages: 128

MultiConnect Dragonfly MTQ-MNA1-B01

Brand: Multitech Pages: 45

Brand: VAT Pages: 12

Brand: Ebyte Pages: 25

Brand: HANYOUNG NUX Pages: 4

Brand: Watts Pages: 12

Brand: tau Pages: 20

Smart Bias-T SBT-6962690-FFM

Brand: Amphenol Pages: 2

OJ GreenZone Module A

Brand: Exhausto Pages: 92

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands