manualshive.com logo in svg

Miranda Kaleido-X (7RU), Quick Start Manual, Page: 20 / 43

Share
Download
Miranda Kaleido-X (7RU) Quick Start Manual Download Page 20

14

Setting Up the Kaleido-X (7RU) Multi-Viewer

Finding the System IP Address, System Name, and Application Version

2

8. When prompted to restart the system to apply your changes, click 

Yes

.

The new configuration will become effective once the system restart has completed.

Finding the System IP Address, System Name, and Application Version

To find the system IP address, system name and application version:

1. Connect a mouse to the front USB connector of an output card.

2. Right-click anywhere on the monitor wall. On the shortcut menu, point to 

Monitor Wall 

(if you clicked 

a monitor), and then click 

Show dashboard

 to display the dashboard associated with the current 

head. A small window appears, revealing the frame IP address and the system version. Take note of 
these values — they will be used later in the configuration process.

Display from card output (partial view) showing dashboard at the bottom right

Summary of Contents for Kaleido-X (7RU)












































Reviews:

No comments