Kaleido-X (7RU)
Quick Start Guide
13
Changing the IP Address of a Kaleido-X from the Monitor Wall
The IP address, system name, and other parameters can be set via a control panel on the monitor wall.
To change the IP address of the Kaleido-X from the monitor wall:
1. Connect a mouse to the USB connector of an output card.
2. Connect a USB keyboard to the USB connector of an output card.
3. Right-click anywhere on the monitor wall, point to
Monitor Wall
(if you clicked a monitor), and then
click
System configuration
.
The
System Configuration
window appears.
4. Click the
Ethernet
tab.
5. Type the required Frame IP address, network mask, and gateway address in the appropriate boxes.
6. Type the required addresses for all outputs.
7. Click
OK
.
Kaleido-X (7 RU)
Kaleido-X (7 RU) × 2
Frame IP address
10.0.3.70
10.0.3.70
Network mask
255.255.0.0
255.255.0.0
Gateway
10.0.0.1
10.0.0.1
Output A
10.0.3.66
10.0.3.66
Output B
10.0.3.67
10.0.3.67
Output C
10.0.3.68
10.0.3.68
Output D/EXP
10.0.3.69
—
Output A (frame B)
—
10.0.3.61
Output B (frame B)
—
10.0.3.62
Output C (frame B)
—
10.0.3.63
Note:
If the IP address of the Kaleido-X has been changed (i.e. it no longer corresponds to the as-shipped
configuration), it is still possible to determine the IP address. To determine the IP address of your
Kaleido-X, see “Finding the System IP Address, System Name, and Application Version” on page 14.