Minuteman Kleen Sweep 35W HM35BQP, Operation Manual

Page: 14 / 42

14
Replacing the Side Broom V-Belt
•
Tilt the Kleen Sweep 35W back on its handlebar (refer to section, “Replace Broom
Roller”)
•
Remove hood (3 ea. Screws)
•
Lift side broom and uncock round belt
•
Remove round belt and assemble new one.
•
NOTE : Refer to direction arrow.
Filter System – Dust Extractor
fine dust in the broom housing is suctioned through a filter module by the dust extractor fan.
The filter module (1) is located in the rear part of the machine and is removed as follows:
1 side broom attaching bolt
2 round belt for side broom drive
3 V-belt for broom roller drive
4 Round belt
5 Pulley