Minuteman Kleen Sweep 35W HM35BQP, Operation Manual

Page: 16 / 42

16
Maintenance
Compliance with our recommended maintenance and service schedule will guarantee a
dependable machine all the time. It is better and cheaper to take precautions instead of facing
costly repair work. If your in-house facilities are unable to perform the work per maintenance
schedule, your authorized distributor will be glad to conclude a maintenance agreement with
you. For all inquiries or parts orders, always specify chassis and motor numbers as printed on
the data plate. The data plate is located on the left side under the hood of the handlebar. When
performing cleaning or service work or replacing parts, stop the motor, pull ignition key and
disconnect the power. Use adequate tooling for maintenance, servicing and adjustment jobs
only. As far as safety is concerned, spare parts will at least be of the same quality as genuine
parts. When working on the electrical system, disconnect battery plug.
Per Service Hours
Daily
50 100 200
Empty dirt hopper, clean
the guide edges inside the
chassis
Check broom roller and
side broom for wear and
foreign matter (e.g. Tape,
Wire), replace as required
Charge Batteries
Check sweeping track
width, adjust as required
Check all sealing strips for
appearance, replace as
required. Strip tips should
slightly tough the floor;
adjust as required
Check drive belts for wheel,
extractor fan, broom roller
and side broom for
appearance and wear,
adjust tension or replace as
required
Check traction drive control
cable, adjust as required
Check dust extractor and
filter system for good seal,
replace as required
Check dust extractor fan
and flap for function
Check dirt hopper lock
Clean Motor, Check carbon
brushes for ease of
movement and wear, clean
as required