8
9
RACKMOUNT CONFIGURATION
The Battery Pack comes with mounting brackets for the standard 19" (46.5cm)
rack installed on the Battery Pack. The mounting brackets to fit a 23" (59.2cm)
rack and Rail Kits for 4-post racks and cabinets are also available. The
screws for mounting the Battery Pack to the rack are included.
TOWER CONFIGURATION
The tower configuration allows the user to install the Battery Pack in the up-
right position next to the UPS and the tower computer. The tower brackets are
provided with the Battery Pack.
WARNING:
Use two or more people when
installing the Battery Pack. Use
CAUTION,
the Battery Pack is extremely
heavy.
1. The Battery Packs come with the rackmount brackets pre-installed. Remo-
ve the rackmount brackets when installing in the Tower Configuration.
2. Once the location of the Battery Pack has been determined, place the
tower brackets in the desired location.
WARNING:
The Battery Pack must be installed in the proper up-right posi-
tion. If the Battery Pack is not installed in the proper up-right position the
Batteries will be damaged. Once the Battery Pack is placed in the tower
brackets, looking at the front panel of the Battery Pack the top cover of the
Battery Pack MUST be on your left hand side.
3. Slide the Battery Pack into the tower brackets. Make sure that the Battery
Pack is stable.
4. The LED face plate can be rotated to read in the up-right position. Remove
the front panel from the Battery Pack. On the backside of the front panel,
push the LED face plate outwards the face plate will pop out. Position the
LED face plate so that it reads in the up-right position. Re-install the front
panel on the Battery Pack.
5. The Tower Configuration is complete. See Connecting the Battery Pack.
WALLMOUNT CONFIGURATION
The wallmount configuration
allows the user to mount the Battery Pack on the
wall. There is a wallmount bracket kit available for the Battery Pack. The kit
includes two wall mounting brackets, ten retaining screws, and the wallmount
template.
WARNING:
Use two or more people when installing the Battery
Pack. Use
CAUTION,
the Battery Pack is extremely heavy. The Battery
Pack's side panels have mounting bracket screw holes for attaching the wall
mounting brackets.
1. The Battery Packs come with the rackmount brackets pre-installed. Remo-
ve the rackmount brackets when installing in the Wallmount Configuration.
2. Once the location and position of the Battery Pack has been determined,
lay the Battery Pack down flat.
CAUTION! DO NOT USE THE MOUNTING BRACKETS TO LIFT
THE BATTERY PACK.
The mounting brackets are
ONLY
for secur-
ing the Battery Pack to the rack.
NOTE:
The mounting brackets can be mounted in the middle of the Battery
Pack.
1. Remove the Battery Pack from the shipping box.
2. Mount the Battery Pack into the rack and secure with the retaining screws.
WARNING:
Use two or more people when installing the Battery Pack. Use
CAUTION
, the Battery Pack is extremely heavy. Do not move the rack
after the units have been installed. The rack may become unstable due to
the weight distribution.
3. The Rackmount Configuration is complete. See Connecting the Battery
Pack.
