15
Ejecting a film holder
Use the eject button on the scanner body or in
the DiMAGE Scan Utility window to remove the
holder; the scanner automatically ejects the
holder to its initial insertion position. Do not
touch or hinder the holder while it is moving.
When the indicator lamp goes out, remove the
holder from the scanner.
Do not insert the film holder into the scanner while
the DiMAGE Scan Utility is launching or the scan-
ner is initializing (the indicator lamp blinks during
this period).
Loading a film holder into the scanner
Before using the scanner, install the DiMAGE Scan Utility; see the software instruction manual.
Turn on the scanner and then start the computer. Launch the DiMAGE Scan Utility before insert-
ing the film holder.
Insert the film holder into the scanner in the direction
indicated by the white arrow. Hold the holder straight
and level when inserting it into the scanner.
Carefully push the holder into the
scanner until the arrow mark (1) is
aligned with the scanner door; the
holder will be automatically fed into
the scanner from that point. Never
touch or hinder the holder while it is
moving.
1
Eject
button
