4. Default Manual Exposure Level Adjustment
Default Manual Exposure Level Adjustment
The center density setting of the Default Manual Exposure Level Adjustment can be set to one of nine
settings. With copy density 5 as the middle setting, decreasing the setting value lightens the density and
increasing the setting value darkens the density.
1
Use the main switch to turn off the copier.
While holding down the Exposure Control
Key
5
, turn on the copier. The copier
enters the Default Manual Exposure Level
Adjustment.
2
Press the Exposure Control Keys
4
and
6
to select a density setting.
3
Press the Start Key to print one copy in
order to check the selected density.
4
Press the Clear/Stop Key to enter the
setting and exit the adjustment.
Copy density 1 (lightest)
Copy density 2 (lighter)
Copy density 3 (lighter)
Copy density 4 (lighter)
Copy density 5 - middle setting
Copy density 6 (darker)
Copy density 7 (darker)
Copy density 8 (darker)
Copy density 9 (darkest)
C1159O055DA
C1159O056DA
C1159O057DA
C1159O058DA
Chapter 4
Special Functions
26
