MINOLTA-QMS Crown Document Option Commands, Reference Manual

Page: 93 / 134

Selecting Emulation Features 93
Carriage Returns
The criscrlf command translates each carriage return in the job's data stream to a carriage
return/linefeed combination.
HP PCL5 Emulation Commands
The HP PCL5 emulation commands select the default font, the symbol set, the number of
lines per page, line termination methods, the point size of the default font, whether to
retain fonts, macros and patterns across job boundaries, whether to print bitmap or
scalable fonts, and whether to select the default font by id. Disk commands store or
remove fonts, macros, and patterns to or from the disk.
Default Font
The font command selects the default font for the emulation.
<value> on | off
Default
Determined by printer control panel setting.
Syntax %%IncludeFeature: criscrlf (< value>)
<value> on | off
Default Determined by printer control panel setting.
Syntax %%IncludeFeature: font (< name>)
<name> courier10 | courier10bold | courier10italic | courier12 | courier12bold |
courier12italic | lineprinter | times* times*italic | times*bold | times*blditalic | univ*
| univ*italic | univ*bold | univ*bolditalic | univcond* | univcond*italic | univ-
cond*bold | univcond*blditlc | selectbyid.
Font names with a * indicate that they are scalable and that pointsize will be
applied to them.
selectbyid indicates that the default font id number is used for font selection.
Note
Selecting a font by fontid overrides the symbolset <value>.