MINOLTA-QMS Crown Document Option Commands, Reference Manual

Page: 40 / 134

Selecting Printer Features 40
Selecting Paper
The input command selects the paper type or input bin to use for the body of the print job.
You can specify paper size by the size identifiers (Letter, A4, and so on) or by input bin
numbers (1 through maximum number of input bins), or both (Letter 2). If you request a
Syntax %%IncludeFeature: input (<source>)
<source> <physical> <input_bin> |
<physical> <logical> |
<physical> |
<input_bin> |
<logical>
<physical> ::==
Letter | Legal | Ledger | Executive | A5 | A4 | A3 | B5 | B4
<input_bin>
1 | 2 | 3 | 4 | manualfeed | * |
depending on the maximum number of bins
0 may indicate manual feed
* indicates current default input bin and other bins of the same size.
<logical>
upper | lower |
other defined name
Default %%IncludeFeature: input ( * )
Examples
%%IncludeFeature: input (Letter)
%%IncludeFeature: input (Letter 2)
%%IncludeFeature: input (1)
%%IncludeFeature: input (Letter upper)
%%IncludeFeature: input (upper)
Note The paper sizes are dependent on the printer. For information on the paper sizes
supported by your printer, see your printer documentation.
Job commands encoded in the page description language (PDL) can override
this command. If there is no such command in the job and this command is not
present, the printer uses the configuration setting for the default input bin of the
printer (and the size of paper in that bin.)
The number and names of paper input bins may vary on each printer. See
“Printer Bin Assignments” in Appendix A for the names of input and output bins
on printers.