MINOLTA-QMS Crown Document Option Commands, Reference Manual

Page: 30 / 134

Header and Trailer Pages 30
Document Control Commands
These commands can be used to output of the document and formatting characteristics of
the job.
PageOrder Command
This is used to control the order of pages in the document file or data stream which in turn
may be used by the print system to reorder the pages to take advantage of special effects or
features.
Pages Command
This statement defines the number of virtual pages that the document will image. This can
be different from the number of physical pages the engine prints This is used to determine
the odd or even boundary when duplexing.
Syntax %%PageOrder: <setting>
<setting> <setting> ::== Asend | Descend
Ascend — pages are in ascending order beginning with page on and increment-
ing to the highest page number.
Descend — pages are in descending order starting with the highest possible
page number and decrementing to page one.
Default no default
Syntax
%%Pages: <numpages>
<numpages> Any integer up to 7 digits
Notes
Any value greater than 7 digits will be truncated.
The value <numpages> must be set to the actual number of pages in the docu-
ment for descending job streams.