MINOLTA-QMS Crown Document Option Commands, Reference Manual

Page: 110 / 134

Selecting Emulation Features 110
Resource Command
Default Printer configuration dependent
Format
Floating point number
Syntax %%IncludeFeature:resource (resource id object code)
Purpose
Establishes the current resource and the default object code value for the cur-
rent job to which it is attached.
Notes
This command is identical to the %%IncludeFeature:install DOC. It is included
for backward compatibility.
All downloaded objects are by default temporary, and will be deleted at the end
of a job unless Retain Temporary is set to on, true, or on compatibility. If the file
that the %%IncludeFeature: resource command is attached to does not make
the downloaded font permanent and Retain Temporary is not set, then those
objects are removed from the disk when the job completes.
A downloaded font can only be accessed by its ID if the font is stored in the cur-
rent resource. Regardless of its resource, a font can be selected by its
attributes.
Variables resource id
Purpose Identifies one of the possible locations for downloaded objects.
Range
0-6
Default Internal system disk
(usually DSK6:/BIN/EMULATE/PCL/FONTS
Format Integer
Notes If no resource item is provided, the internal default location is
used; otherwise, this parameter, which must be provided, speci-
fies one of the alternate locations. For most printers, resource 6 is
the system disk.
object code
Purpose Assigns a code to an object such as a font, macro, or pattern.
Range 0-32767
Range 0
Format Integer