![background image](http://html.mh-extra.com/html/minn-kota/talon-10/talon-10_owners-manual_1802709006.webp)
6 | minnkotamotors.com
©2014 Johnson Outdoors Marine Electronics, Inc.
GETTING STARTED
Your Talon can store 10 total remote IDs. If 10 IDs have been learned to the Talon unit and an eleventh
remote is learned, the first ID learned will be overwritten with the eleventh remote ID. The new remote
will be learned, the oldest will be erased.
TO LEARN A NEW REMOTE ID
1. Retract the anchor if it is not already
retracted by pressing the Auto UP switch
.
2. After the anchor has retracted, press and
hold the Auto UP switch
on the Talon.
A steady tone
will be heard.
3. While continuing to press the Auto UP
switch
, press the UP button
on the new remote one time.
4. A series of 3 beeps
will be heard,
indicating the new remote has been learned.
5. Release the Auto UP switch
on the
Talon after the 3 beeps begin.
TO ERASE ALL STORED REMOTE IDS
(THIS MAY REQUIRE ASSISTANCE FROM
A SECOND PERSON)
1. Retract the anchor if it is not already retracted.
2. Disconnect the white power lead from
the battery.
3. Press and hold the Auto UP switch
on the Talon.
4. While continuing to press the Auto UP
switch
, reconnect the white power lead
to the battery.
5. A series of fast beeps will be heard and then
a long steady tone
.
6. Release the Auto UP switch
after the
long steady tone has begun. All remote
IDs are now erased.
Your Talon comes direct from the factory with two remotes pre-programmed to
your unit. Each remote includes a lanyard that may be attached to either end of
the remote to suit your preference. The remote has two buttons: UP and DOWN.
To Deploy
: Press the DOWN button twice within ½ second.
To Retract:
Press the UP button once.
To Stop:
Press the UP button
once or DOWN button
twice within ½ second.
Each remote uses a CR2032 size lithium coin cell battery. See page 13 for instructions
on how to replace the battery.
USING YOUR REMOTE
PROGRAMMING A NEW REMOTE