©2014 Johnson Outdoors Marine Electronics, Inc.
minnkotamotors.com | 7
DEPLOY
Raising and lowering your Talon can be done wirelessly from
anywhere in the boat using your remote or directly through the
control panel. Two button presses (within ½ second) of the remote
DOWN button
or one button press of the control panel
Auto DOWN button
automatically deploys the anchor.
RETRACT
One button press of the remote UP button
or control
panel Auto UP button
automatically raises the anchor to the
retracted position. Talon shuts off automatically when completely
retracted. There is no need to hold down a switch or button.
Talon’s revolutionary Auto-Drive feature
stops your boat with greater speed and
precision than the competition. Two button
presses (within ½ second) of the remote
DOWN button
not only deploys your
anchor automatically, but Talon actually
drives the anchor in for you to ensure the
anchor is seated. Talon’s Auto-Drive deploy
shuts the anchor off when the spike contacts
the bottom. Auto-Drive will automatically
power the spike into the bottom with three
successive hits, using increasing force on
each hit.
3 SECONDS
3 SECONDS
AUTO-DRIVE
AUTO-DEPLOY/RETRACT
USING YOUR TALON
Depth of
Deployment
Indicator Lights
Mode Button
Rough Water Mode
Indicator Light
Soft Bottom Mode
Indicator Light
Note:
Attempting to retract the Talon BEFORE it has completed its
automated deployment sequence, will only cancel the deployment
sequence in process, and not retract the Talon. You may retract the Talon
normally when a deployment sequence has been completed or cancelled.