![background image](http://html.mh-extra.com/html/minn-kota/talon-10/talon-10_owners-manual_1802709012.webp)
12 | minnkotamotors.com
©2014 Johnson Outdoors Marine Electronics, Inc.
QUICK REMOVAL ACCESSORIES
If you intend to remove or adjust your Talon frequently, you might consider installing the following
accessory kits: Quick Release Handle Kit (1810232) and Talon Quick Disconnect Plug (1810240). For
accessory information, refer to page 18.
TO REMOVE
1. Prior to removal, make sure the Talon is fully
retracted, and the power cable is completely free
from all routing restraints and fully disconnected from
power. This includes any connections made for the
Deployment Notification Alarm (green wire).
NOTE:
Disconnection from power can be made easier by using the Talon Quick Disconnect
Plug accessory, see page 18.
CAUTION:
Be sure that the top stop nut assembly is tight BEFORE attempting
to remove the Talon from the mounting bracket.
2. Using a ⁄" box end wrench or socket wrench,
carefully loosen the four (4) vertical adjustment nuts.
NOTE:
DO NOT REMOVE the four (4) vertical adjustment nuts to prevent them from being
misplaced. They only need to be loosened to remove the Talon from the mount. Nuts are
shown here removed for illustration purposes only.
3. Slide the Talon Assembly up until it clears the
mounting straps.
4. Be sure to retighten the vertical adjustment nuts
on the mounting straps in the mounting bracket
to prevent them from rattling during transport, and
to protect the threads.
IMPORTANT:
When reinstalling Talon, it is important to check the tension of the four (4)
vertical adjustment nuts after their initial use, and periodically thereafter to ensure they
maintain their recommended torque of 30 ft lb.
USING YOUR TALON
REMOVAL AND STORAGE
3
DO NOT REMOVE
LOOSEN ONLY
If needed, your Talon can be easily removed from the Transom Bracket.
2/4