![background image](http://html1.mh-extra.com/html/minn-kota/mk-230pcl/mk-230pcl_owners-manual_1802692017.webp)
minnkotamotors.com | 17
©2020 Johnson Outdoors Marine Electronics, Inc.
OPERATING INSTRUCTIONS
The charger can be manually switched between 4 different modes:
1. Flooded Lead-Acid
2. AGM/High Performance AGM
3. Lithium (LiFePO
4
)
4. Equalize (for Flooded Lead-Acid)
In order to optimize the performance of your batteries or to prevent damage, you will need to properly set each charger bank for the
correct battery type (each bank can be independently set). The factory default setting is Flooded Lead-Acid.
Setting the Battery Type
SELECTING THE BATTERY TYPE
a. Plug the charger AC cord into the AC outlet.
b. During power up all LEDs will temporarily turn
on, then just 1 YELLOW LED will remain on.
This YELLOW LED will indicate the current battery
type selected.
c. To change battery type, press and hold the Battery
Selection
button until the YELLOW LED indicates
the desired battery type, then release the button. The
battery type will be saved even if the AC cord or DC
output cords are disconnected.
AC Cord
AC Cord
LEDs
LEDs
Battery
Battery
Selection
Selection
Button
Button
1
1a
1b
CHARGE
BATTERY TYPE
CHARGE
BATTERY TYPE
BATTERY SELECTION
BATTERY SELECTION
100%
75%
AGM/HP AGM
50%
FLOODED
25%
LITHIUM*
100%
75%
AGM/HP AGM
50%
FLOODED
25%
LITHIUM*
Color Specs
LED Holes to Remain CLEAR
Emboss (Does not print)
Dieline (Does not print)
Pantone 7409C
Pantone Black 6C
Pantone Cool Grey 11C
Pantone 361C
MK
230
PC
O
N
-B
O
A
RD
B
AT
TE
RY
CH
A
R
G
ER
2 B
an
ks
•
15 A
m
ps pe
r B
an
k
•
3
0 A
m
ps T
ot
al
*FOR LITHIUM BATTERIES:
Blinking Green Light for Charging
Solid Green Light for Fully Charged
NOTICE:
The battery type will be saved even if the
AC cord or DC output cords are disconnected. When
the charger is powered "on", the battery type selected
will be recalled from memory.
WARNING
Battery type is factory preset for Flooded Lead-Acid. If you are using alternate type batteries, select Lithium
(LiFePO
4
)
or AGM/High
Performance AGM. Failure to select the correct battery type could result in damage to your battery and/or cause acid leaks.
Flooded Lead-Acid batteries should be equalized per the battery manufacturers’ recommendations. Only Flooded Lead-Acid batteries
should be equalized. The charger will only allow selection of the Equalize Mode if the previous selection was Flooded Lead-Acid. To set
Equalize Mode, press and hold the Battery Selection button until all 3 YELLOW LEDs are lit, then release the button. Once in Equalize
Mode, the equalize process will only be performed one time. Once this cycle is completed or if the cycle is interrupted (by unplugging
the AC or a DC cord), the charger will revert back to the Flooded Lead-Acid battery type.
Setting Equalize Mode for Flooded Lead-Acid Batteries
Summary of Contents for MK 230PCL
Page 1: ...PRECISION ONBOARD CHARGERS MK 230PCL MK 345PCL MK 460PCL Owner s Manual...
Page 31: ...minnkotamotors com 31 2020 Johnson Outdoors Marine Electronics Inc NOTES...
Page 33: ...CHARGEURS DE BORD PRECISION MK 230PCL MK 345PCL ET MK 460PCL Manuel du propri taire...
Page 63: ...minnkotamotors com 63 2020 Johnson Outdoors Marine Electronics Inc REMARQUES...