Minka Group Minka Aire Sabot, Instruction Manual Warranty Certificate

Page: 13 / 48

6
ELECTRICAL CONNECTIONS
WARNING: To avoid possible electrical shock be sure electricity is turned off at the main fuse or
breaker box before wiring.
NOTE: The Aire Control® System for this DC motor fans is equipped with a learning frequency
function which has 32 code combinations to prevent potential interference from other remote
units.
The frequency on your Receiver and Transmitter units have been preset at the factory. (Fig. 13)
No frequency change is necessary, should you desire to install another Minka Aire DC motor fan
within the same home or area with a separate frequency code please see the "frequency
interference" troubleshooting section of this instruction manual to learn how to change the
frequency.
Step 1. Motor to House Supply Wires Electrical Connections: Firmly snap the wire connection
plugs from the motor and the power cord together. (Fig. 14)
Connect the WHITE wire (Neutral) from the outlet box to the WHITE wire marked "AC in N" in the
power cord. Connect the BLACK wire (Hot) from the outlet box to the BLACK wire marked "AC in
L" in the power cord. Secure all wire connections with the plastic wire nuts provided. (Fig. 15)
Fig. 13