-Save the entries and quit the menu by confirming with
OK (button 6). All function displays of the menu flash for
approx. 3 seconds to confirm. The appliance then returns
to the normal operating mode.
Setting the water tank illumination
Switch to the menu function by simultaneously pressing
buttons 2 and 3 for approx. 3 seconds. The function
displays of the menu will flash first in a blinking line, then
the current settings will be displayed.
Then press key 2 repeatedly until the required illumina-
tion is set.
The image below shows the displays for the 2 possible
settings.
Save the entries and quit the menu by confirming with
OK (button 6). All function displays of the menu flash for
approx. 3 seconds to confirm.
The appliance then returns to the normal operating
mode.
Reset function
This function resets all previously changed values to
their original factory
settings.
The following settings and stored values are affected:
• Water hardness
• Cup filling level
• Coffee grinding quantity
• Coffee temperature
• Shut-off time
• Water tank illumination
To reset the appliance to the factory settings, press and
hold buttons 2 and 4 for approx. 3 seconds. The reset
is confirmed by the symbols flashing several times. The
appliance returns automatically to the normal operating
mode.
Once you have finished using the appliance:
-Turn the appliance off pressing the on/off button. It will
then perform a rinsing cycle.
-Note : If the water tank is empty, the switch-off process
will automatically be delayed for 15 minutes.
-The coffee machine subsequently prompts you to empty
the waste container (E). The following appears on the
display:
-Empty the waste container every time to prevent mould
from building up.
-The coffee machine automatically switches itself off
after 15 seconds.
-In the event of an emergency, you can switch off the
coffee machine at any time during the operation by
pressing the on/off button 2 times.
Exception: during the rising procedure when switching
the coffee machine on/off.
Cleaning
- Disconnect the appliance from the mains and allow it to
cool before undertaking any cleaning task.
- Before cleaning, allow the coffee machine cool down.
- Clean the equipment with a damp cloth with a few
drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or base
pH such as bleach, or abrasive products, for cleaning the
appliance.
- Never immerse the coffee machine itself , the mains
cable or the mains plug into water or other liquids.
- Do not clean housing parts such as the waste contai-
ner, water tank or drip tray in the dishwasher. Otherwise,
the high-gloss surfaces will gradually become dull and
matt.
- Never pour water into the coffee bean container or
grinding mechanism as this could cause damage.
- Clean the outer surface of the appliance with a soft
damp cloth, the display field can be cleaned e.g.with a
lens cleaning cloth.
- Remove the waste container (E) and the water tank (G)
and clean both with warm water and a mild washing up
liquid.
- Empty the drip tray at regular intervals, but at least
when the red filling level indicator becomes visible
