Do not attempt to disassemble or repair the appliance by yourself in
order to avoid a hazard.
- Ensure that the voltage indicated on the rating label matches the
mains voltage before plugging in the appliance.
- Connect the appliance to a base with an earth socket withstanding
a minimum of 10 amperes.
- The appliance’s plug must fit into the mains socket properly. Do not
alter the plug. Do not use plug adaptors.
- Do not force the power cord. Never use the power cord to lift up,
carry or unplug the appliance.
- Do not wrap the power cord around the appliance.
- Check the state of the power cord. Damaged or tangled cables
increase the risk of electric shock.
- Do not touch the plug with wet hands.
- Do not use the appliance if the cable or plug is damaged.
- If any of the appliance casings breaks, immediately disconnect
the appliance from the mains to prevent the possibility of an electric
shock.
- Do not use the appliance if it has fallen on the floor, if there are
visible signs of damage or if it has a leak.
Use and care:
- Do not switch the appliance on without water.
- Do not use the appliance if the on/off button does not
work.
- Do not move the appliance while in use.
- Respect the MAX level indicator.
- Unplug the appliance from the mains when not in use
and before undertaking any cleaning task.
- This appliance should be stored out of reach of children
and/or the disabled.
- Never leave the appliance connected and unattended if
is not in use. This saves energy and prolongs the life of
the appliance.
- Any misuse or failure to follow the instructions for use
renders the guarantee and the manufacturer’s liability
null and void.
Instructions for use
Before use:
- Make sure that all the product’s packaging has been
removed.
- Before using the product for the first time, we recom
-
mend running it just with water.
- Before using the product for the first time, clean the
parts that will come into contact with food in the manner
described in the cleaning section.
Filling with water:
- You must fill the water compartment before turning on
the appliance.
-Push the coffee dispensing unit (C) into the uppermost
position.
- Remove the water tank (G) from the appliance.
- Fill the water tank with fresh water up to its Max on the
lower edge of the filling hole.
-Replace the water tank. Push it until it snaps.
